Nouvelles et Evènements

Article: Streamlining Quality Assurance

March 1, 2024

What are the benefits of in-house validation testing in expansion joint manufacturing?

Find out the answer in this article written by Garlock's Lindsay Hornbeck, Nicholas Wheeler, and Ming-Hang Yang.

Article: Determining Low-Temperature Ratings for Rubber Seals

February 17, 2024

In this article, Product Engineer Sarah Young and Applications Engineer Brett Yoder explore creating safe product usage guidelines, focusing on how to determine low-temperature ratings for industrial rubber seals.

Article: Bridging the Gap with Case Studies and Real-World Results

February 12, 2024

In this insightful article, Garlock Engineer Jim Drago explores how to bridge the gap between theory and practice with case studies and real-world results.

Learn how Garlock gaskets offer a tolerance for poor conditions and variation of installation practices while maintaining a seal.

Article: The Capabilities of Expansion Joints

January 15, 2024

Why is validation testing a critical step for performance expansion joint design? Backed by validation testing, performance expansion joints are among the industry’s safest and most reliable.

In this article from Garlock engineers Derek Hicks and Lindsay Hornbeck, you'll read about three key areas where functional testing can make all the difference when validating a design for a specific end-use.

Article: Performance Expansion Joints: More Than Meets the Eye

December 13, 2023

Material validation is critical when designing a high-performance expansion joint. Therefore, it is important to know what is on the inside of the expansion joint and not just the outside. Numerous issues could arise from improper material selection and layering construction that will ultimately affect the life and performance of the expansion joint. In this article, you'll learn about the benefits of investing in high-performance expansion joints.

Article: Addressing Sealing Challenges in Rotating Equipment for the Food and Pharmaceutical Industries

July 31, 2023

The most challenging operational environments for sealing mixers, agitators, and pumps are often found in the food and pharmaceutical industries. In this article, Garlock Senior Application Engineer Joshua Cavinee highlights some of the common environments within these industries, how the operating conditions affect seal design and selection, and shares some solutions to maintain a high level of performance in rotating equipment.

Article: Addressing Premature Failure in Elastomeric Gaskets

July 31, 2023

Water treatment challenges continue to worsen as municipalities grapple with the risk of encountering premature failure in elastomeric gaskets. Such a risk brings up several problems, including reduced efficiency, sudden equipment failure, contamination, and costly maintenance and downtime.

In this article, Garlock Fluid Sealing Specialist Nick Pucci discusses addressing premature failure in elastomeric gaskets.

13 Common Questions Regarding Rotating Shaft Seals

March 7, 2023

Rotating shaft seals can be found in virtually every facet of daily lives—household appliances, cars, trucks and across industries. Though often treated as a commodity product, their failure can result in costly downtime and lost productivity. In this article, Senior Applications Engineer Karyn Stratton answers some frequently asked questions on Rotating Shaft Seals.

Click here to read the article in Pumps & Systems Magazine. 

Fluid Handling: Pushing the Limit With Graphite Seals

February 13, 2023

While new solutions are exciting, sometimes the best practice is to utilize existing technology in a novel way. In the case of valve-stem packing, mechanical limitations can negatively impact process efficiencies leading to premature failure. In this article by Applications Engineer Brennan Hughes, you'll learn how to prevent system failures with new approaches to valve-stem packing.

Click here to read the full article in Chemical Processing Magazine.

Enpro Completes Divestiture of GPT

January 30, 2023

Enpro successfully completed the divestiture of GPT, formerly known as Garlock Pipeline Technologies, which was formed in 2012 when Enpro combined three businesses: PSI, Pikotek, and FrankenPlastik. In 2021 Enpro brought the PSI product lines to Garlock, where the Garlock team is proud to manufacture, support, and continue developing these products. GPT is the world's leading manufacturer of critical-service flange systems, spring-energized jacketed seals, and electrical flange isolation kits for various industries, including oil and gas, water, wastewater, construction, and infrastructure.

The Low Cost of High-Grade PTFE Diaphragms

Dec 13, 2022

When selecting an appropriate diaphragm material to meet the needs of an application, a balance of functionality and cost-effectiveness must be met. Learn more about the correlation between performance and savings in this Fluid Handling International article written by Alex Eanniello, Applications Engineer at Garlock.

Click here for the full article in Fluid Handling International. 

Garlock Business Development Manager Hafeez Hameer Awarded 2022 Robert K. Callahan Future Leader Award

December 15, 2022

During the PTDA Industry Summit in October, Garlock's Hafeez Hameer was presented with the Robert K. Callahan Future Leaders Award. The award recognizes a young leader who exhibits a true passion for the industry and a desire to grow within the industry. 

Click here to see Hafeez accept his award.

Selecting Seals for the Uptick in Upstream Oil Production

SEPTEMBER 19, 2022

Upstream oil operations have improved their efficiency and capability of pulling greater quantities of oil out of the ground. Engineers achieve this by drilling deeper, using enhanced oil recovery (EOR), and running at higher temperatures. Although effective, these tactics can pose challenges to the seals used in pumps and compressors, as they often create demanding operating environments. 

In this article, Garlock Project Engineer,​ Sarah Young, and Garlock Applications Engineer, Brett Yoder, explain how seal selection can help you achieve efficiency, productivity, and safety in upstream oil production.

Click here to read the full article in Pumps & Systems Magazine

Small Components Make a Big Difference: The Sealing Systems of Pulp & Paper Mills

August 16, 2022

In the pulp and paper industry, larger, more expensive pieces of equipment tend to get the most attention. However, components such as gaskets and seals play a crucial role in the overall process.

In this article written by Garlock Senior Applications Engineer Matt Tones, you’ll learn how gasket selection can affect performance in pulp and paper systems.

Click here to read the full article in Pumps and Systems Magazine.

Garlock Enters Wireless Communications Industry with WavePro^®

August 8, 2022

Garlock has announced the launch of WavePro^®, a new made-to-order, low-loss dielectric material for antennas. The news comes after an overwhelmingly positive response to the official release of WavePro^® in June at the International Microwave Symposium in Denver, Colorado.

Click here to read the full Press Release.