Model 64 Oil Seal, SPECIAL, MILL-RIGHT V, 17.000 inch Shaft, 18.500 inch Bore, 0.688 inch Width, Heavy Duty Garter Spring
- Shipping Weight: 4.68 lbs
- Style/Model: Model 64
- Shaft Size (inch): 17.000
- Shaft Size (mm): 431.80
- Bore Size (inch): 18.500
- Bore Size (mm): 469.90
- Width (inch): 0.688
- Width (mm): 17.48
- Lip Material: MILL-RIGHT V
- Split or Solid: Solid
- Case Material: CRS
- Configuration Type (Seals): Single Lip
- ADI/TSE Free: No
- API 589 Compliant: No
- API607Compliant: No
- API622Compliant: No
- DFARS Compliant: No
- FDA Compliant: No
- Fire Safe API 6FB: No
- KTW Compliant: No
- Lip Base Material Abbreviation: FKM
- Lip Base Material Name: Fluoroelastomer
- Max Temperature (C): 204
- Max Temperature (F): 400
- Min Temperature (C): -30
- Min Temperature (F): -22
- Misalignment Tolerance (inch): 0.125 in @ 5,000 ft/min; 0.093 in @ 7,000 ft/min
- Misalignment Tolerance (mm): 3.18 mm @ 25.4 m/s; 2.36 mm @ 35.6 m/s
- NSF® 61 Certified: No
- REACH Compliant: No
- RoHS Compliant: No
- Spacers Exist: No
- Spring Material: 302SS
- Standard/Special: Special
- UPC Code: 717744771560
- USDA Approved: No
- USP VI 661 Compliant: No
- USP VI 87 Compliant: No
- USP VI 88 Compliant: No
- Pressure Max (bar): 0.48
- Pressure Max (psi): 7
- Primary Dimensional Unit of Measure: Imperial
- Max Shaft Surface Speed (meter/sec): 35.6
- Max Shaft Surface Speed (feet/min): 7,000
Garlock KLOZURE® high performance oil seals protect critical equipment by preventing premature bearing failure due to lubrication loss or contamination. Specially engineered elastomers, including the MILL-RIGHT® family of materials, provide best in class product life with up to 90% less seal wear due to abrasion over standard seals.
In rotary applications with severe shaft runout or misalignment, the Model 64® oil seal is the ultimate sealing tool. With the industry's highest shaft to bore misalignment ratings coupled with one of the fastest shaft speed ratings, the Model 64® oil seal can solve the most difficult bearing protection problems. The proprietary material used in the sealing element designed for extreme flexibility is assembled with a heavy duty metal case, metal filler ring, brass insert and a special garter and finger spring design for a unique combination resulting in worry free installation and performance.
When up-time in your plant is critical, trust the MILL-RIGHT® family of elastomer sealing elements to keep you running. Each of the MILL-RIGHT® materials has been specifically engineered to have the highest abrasion resistance and lowest wear of any seal in the industry. This translates directly to higher equipment efficiencies, longer bearing life, increased production and less maintenance. Upgrade from MILL-RIGHT® N (Black) to MILL-RIGHT® ES (Blue) or from MILLRIGHT® ES (Blue) to MILL-RIGHT® V (green) and you can easily double your Mean Time Between Failures (MTBF).
- Overview
Features and Benefits:
- MILL-RIGHT® sealing elements generate less heat, lower power consumption, improve chemical resistance and extend service life
- Bearing damage from displaced springs is prevented by the unique combination of a finger spring mechanically locking a garter spring into place
- The special garter and finger spring combinations reduces leaks caused by high shaft runout by applying consistent lip load around the entire shaft
- After events where excess runout may have occurred, the garter spring locked into place by the finger spring will rebound towards its nominal location to resume effective sealing
- Heavy duty metal case provides maximum bore retention
- Metal filler ring prevents seal distortion seal ensuring a true fit in the bore
- Sealing element will not fall out of case with bond failure. A brass insert clamps to the element, and the metal filler ring mechanically locks the components into place.
Media Use:
- Oil
- Grease
Interchange:
,Industries Served:
- Primary Metals
- Mining
- Pulp and Paper
- Oil and Gas