Garlock KLOZURE® Model 53R1 Oil Seal, MILL-RIGHT N, CRS, 5.875 in Shaft, 7.250 in Bore, 0.906 in Width, Dual Opposed Lips
- Shipping Weight: 1.262 lbs
- Brand: KLOZURE®
- Style/Model: Model 53R1
- Shaft Size (inch): 5.875
- Shaft Size (mm): 149.23
- Bore Size (inch): 7.250
- Bore Size (mm): 184.15
- Width (inch): 0.906
- Width (mm): 23.01
- Lip Material: MILL-RIGHT N
- Split or Solid: Solid
- Case Material: CRS
- Configuration Type (Seals): Dual Opposed Lips
- Lip Base Material Abbreviation: NBR
- Lip Base Material Name: Nitrile
- Max Temperature (C): 93
- Max Temperature (F): 200
- Spacers Exist: false
- Spring Material: 302SS
- Standard/Special: Standard
- UPC Code: 717744138912
- Pressure Max (bar): 0.48
- Pressure Max (psi): 7
- Primary Dimensional Unit of Measure: Imperial
- Max Shaft Surface Speed (meter/sec): 10.2
- Max Shaft Surface Speed (feet/min): 2,000
Garlock's KLOZURE® Model 53R1 Oil Seal with a MILL-RIGHT™ N lip offers up to 73% improvement in abrasion resistance than standard nitrile seals translating to higher equipment efficiencies, longer bearing life, increased production, and less maintenance.
This R1 model features a secondary excluder lip to keep contaminates out of the lubrication and bearing housing. The excluder seal does not contain a spring, reducing lip load for extended life. R1 models are recommended in applications where minimal lubrication is present at the excluder seal.
This seal is a great bearing protection option to reduce wear on shafts from shaft to seal interference in applications with minimal shaft misalignment. Unlike bonded seals where the rubber to metal bond can fail, resulting in leaks and lack of bearing protection, the Model 53 performance is assured with our assembled combination of a sealing element, heavy duty metal case, adapter ring, and a mechanically retained finger spring.
The KLOZURE® Model 53 is available in multiple dual lip configurations for additional lubrication retention or to prevent contamination ingress. For optimal performance requiring greater misalignment consider KLOZURE® Model 59 or KLOZURE® Model 64.
For longer seal life, choose a MILL-RIGHT™ ES lip for 93% improvement in abrasion resistance compared to standard nitrile seals and 300ºF (150ºC) continuous temperature resistance. Upgrade to a MILL-RIGHT™ V lip for 400ºF (204ºC) continuous operating temperature.
- 总览
Features and Benefits:
- MILL-RIGHT® sealing elements generate less heat, lower power consumption, improve chemical resistance and extend service life.
- Excluder lip safeguards against bearing failure by blocking contaminants from entering the lubrication system.
- Ensure a secure shaft seal with our stainless steel finger spring, mechanically retained to prevent bearing damage from spring dumping and corrosion.
- Adapter ring mechanically locks sealing element, eliminating bearing damage due to rubber to metal bond failures in bonded seals.
- Heavy duty metal case provides maximum bore retention
Media Use:
- Oil
- Grease
- Dust
Industries Served:
- Primary Metals
- Mining
- Pulp and Paper
- Oil and Gas