Garlock KLOZURE® Model 59G1 Oil Seal, MILL-RIGHT V, CRS, 17.323 in Shaft, 18.898 in Bore, 0.912 in Width, GYLON Excluder Lip

24752-3963
Garlock KLOZURE® Model 59G1 Oil Seal, MILL-RIGHT V, CRS, 17.323 in Shaft, 18.898 in Bore, 0.912 in Width, GYLON Excluder Lip
  • Shipping Weight: 6.14 lbs
  • Brand: KLOZURE®
  • Style/Model: Model 59G1
  • Shaft Size (inch): 17.323
  • Shaft Size (mm): 440.00
  • Bore Size (inch): 18.898
  • Bore Size (mm): 480.01
  • Width (inch): 0.912
  • Width (mm): 23.16
  • Lip Material: MILL-RIGHT V
  • Split or Solid: Solid
  • Case Material: CRS
  • Configuration Type (Seals): Single Lip, GYLON Excluder Lip
  • Lip Base Material Abbreviation: FKM
  • Lip Base Material Name: Fluoroelastomer
  • Max Temperature (C): 204
  • Max Temperature (F): 400
  • Min Temperature (C): -30
  • Min Temperature (F): -22
  • Spacers Exist: No
  • Spring Material: 302SS
  • Standard/Special: Standard
  • UPC Code: 717744139346
  • Pressure Max (bar): 0.48
  • Pressure Max (psi): 7
  • Primary Dimensional Unit of Measure: Imperial
  • Max Shaft Surface Speed (meter/sec): 12.7
  • Max Shaft Surface Speed (feet/min): 2,500
Garlock's KLOZURE® Model 59G1 Oil Seal with a MILL-RIGHT™ V lip offers up to 92% improvement in abrasion resistance and greater temperature resistance than standard nitrile seals translating to higher equipment efficiencies, longer bearing life, increased production, and less maintenance. MILL-RIGHT™ V has been specifically engineered to have the highest chemical resistance and temperature capability available in the MILL-RIGHT™ family.\n\nThis GYLON® enhanced model features a secondary excluder lip to keep contaminates out of the lubrication and bearing housing. Lubrication at the GYLON excluder lip is not required due to the minimal frictional heat generated by this unique material, which also withstands abrasive and corrosive fluids.\n\nThis seal is a great bearing protection option for high-speed rotary applications with severe shaft misalignment or in applications with frequent chock removal and installation. The reverse bevel sealing lip prevents lip rollover seen in common lip designs, reducing leaks from installation error. Unlike bonded seals where the rubber to metal bond can fail, resulting in leaks and lack of bearing protection, the Model 59 seal performance is assured with our assembled combination of a sealing element, heavy duty metal case, adapter ring, and a molded in finger spring.\n\nFor optimal performance requiring greater misalignment consider KLOZURE® Model 64. For applications requiring minimal misalignment, consider KLOZURE® Model 53.
  • Overview

Features and Benefits:

  • MILL-RIGHT® sealing elements generate less heat, lower power consumption, improve chemical resistance and extend service life
  • The GYLON® Enhanced excluder lip safeguards against bearing failure by blocking contaminants from entering the lubrication system
  • Easy and fast installation without lip roll over
  • Ensure a secure shaft seal with our stainless steel finger spring, bonded and mechanically retained to prevent bearing damage from spring dumping and corrosion
  • Heavy duty metal case provides maximum bore retention

Typical Applications:

  • Aggressive applications with contamination present

Media Use:

  • Grease
  • Oil
  • Dust

Industries Served:

  • Primary Metals
  • Mining
  • Pulp and Paper
  • Oil and Gas