Garlock KLOZURE® FLOOD-GARD® Bearing Isolator/Labyrinth Seal, Flanged, Standard, Bronze Stator and Rotor, 1.875 inch Shaft, 3.350 inch Bore, 0.976 inch Width, 0.325 inch Flange
28802-9290
- Shipping Weight: 2.107 lbs
- Style/Model: FLOOD-GARD
- Split or Solid: Solid
- Shaft Size (inch): 1.875
- Shaft Size (mm): 47.63
- Bore Size (inch): 3.350
- Bore Size (mm): 85.09
- Width (inch): 0.976
- Width (mm): 24.79
- Stator Material: Bronze
- Rotor Material: 316SS
- Configuration Type (Isolators): Flanged
- Compliances/Standards: IEEE 841 Compliant, IP66 Rating, NEMA MG 1 Compliant
- Axial Motion (inch): +/-0.010
- Axial Motion (mm): +/-0.25
- Brand: KLOZURE® FLOOD-GARD®
- Compliances: IP66 Rating, IEEE 841 Compliant, NEMA MG 1 Compliant
- Flange Exists: Yes
- Flange Length (inch): 0.325
- Flange Length (mm): 8.26
- Max Bore Size (inch): 3.351
- Max Bore Size (mm): 85.12
- Max Temperature (C): 204
- Max Temperature (F): 400
- Min Bore Size (inch): 3.349
- Min Bore Size (mm): 85.06
- Min Temperature (C): -30
- Min Temperature (F): -22
- Misalignment Tolerance (inch): +/-0.015
- Misalignment Tolerance (mm): +/-0.38
- ORing Material: FKM
- Standard/Special: Standard
- Unitizing Ring Material: MILL-RIGHT V
- UPC Code: 191074142229
- Primary Dimensional Unit of Measure: Imperial
- Pressure Max (psi): Ambient
- Pressure Max (bar): Ambient
- Min Shaft Size (inch): 1.873
- Max Shaft Size (inch): 1.877
- Max Shaft Surface Speed (meter/sec): 10.2
- Min Shaft Size (mm): 47.58
- Max Shaft Size (mm): 47.68
- Max Shaft Surface Speed (feet/min): 2,000
Garlock KLOZURE® FLOOD-GARD® bearing isolators offer the ultimate sealing solution for aggressive, flooded lubrication environments. With its patent pending IP66 design, FLOOD-GARD® is a revolutionary seal that combines improved safety and overall process efficiency with cost savings through extended equipment and bearing life.
- Overview
Features and Benefits:
- Patented seal design provides bearing protection even in the most challenging flooded environments, extending the life of rotating equipment
- Rugged, unitized construction for ease of installation
- IP66 in most common design configurations
- Available in standard and small cross section configurations
- Substantially reduced installation time - NO ARBOR PRESS NEEDED
- No metal-to-metal contact between stator and rotor
- Handles up to .015" of misalignment
Typical Applications:
- Rotating equipment such as pumps, motors, gearboxes with flooded internal lubricant levels (levels which are above the bottom of the shaft)