Garlock KLOZURE® ISO-GARD® Bearing Isolator/Labyrinth Seal, Flanged, Standard, Glass Filled PTFE, 1.772 inch Shaft, 2.559 inch Bore, 0.748 inch Width, 0.375 inch Flange
29502-5541
- Shipping Weight: 0.162 lbs
- Style/Model: ISO-GARD
- Split or Solid: Solid
- Shaft Size (inch): 1.772
- Shaft Size (mm): 45.01
- Bore Size (inch): 2.559
- Bore Size (mm): 65.00
- Width (inch): 0.748
- Width (mm): 19.00
- Material: Glass Filled PTFE
- Stator Material: Glass Filled PTFE
- Rotor Material: Glass Filled PTFE
- Compliances/Standards: FDA Compliant, IEEE 841 Compliant, IP55 Rating, NEMA MG 1 Compliant
- Configuration Type (Isolators): Flanged
- Axial Motion (inch): +/-0.015
- Axial Motion (mm): +/-0.38
- Brand: KLOZURE® ISO-GARD®
- Compliances: FDA Compliant, IP55 Rating, IEEE 841 Compliant, NEMA MG 1 Compliant
- Flange Exists: Yes
- Flange Length (inch): 0.375
- Flange Length (mm): 9.53
- Max Bore Size (inch): 2.560
- Max Bore Size (mm): 65.03
- Max Temperature (C): 204
- Max Temperature (F): 400
- Min Bore Size (inch): 2.558
- Min Bore Size (mm): 64.97
- Min Temperature (C): -30
- Min Temperature (F): -22
- Misalignment Tolerance (inch): +/-0.020
- Misalignment Tolerance (mm): +/-0.51
- ORing Material: FDA Compliant FKM
- Standard/Special: Standard
- UPC Code: 717744204655
- Primary Dimensional Unit of Measure: Imperial
- Pressure Max (psi): Ambient
- Pressure Max (bar): Ambient
- Min Shaft Size (inch): 1.770
- Max Shaft Size (inch): 1.774
- Max Shaft Surface Speed (meter/sec): 22.9
- Min Shaft Size (mm): 44.96
- Max Shaft Size (mm): 45.06
- Max Shaft Surface Speed (feet/min): 4,500
ISO-GARD® bearing isolators offer exceptional bearing protection for pumps, motors, and bearing supported industrial equipment under the harshest conditions.
ISO-GARD® products are constructed using a filled PTFE material which provides excellent chemical resistance.
- Overview
Features and Benefits:
- Easy by-hand installation — no need for an arbor press
- Uses less energy than contact lip seals
- Non-contact engineered labyrinth design reduces shaft drag
- Non-wearing components
- Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 55 ratings
- Eliminates repairs for shaft grooving
- Consistent sealing performance
- Non-wearing components
- Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 55 ratings
- Non-wearing components means seal properties are not degraded over time
Typical Applications:
- Pumps, Motors, Bearing supported industrial equipment