Garlock KLOZURE® ISO-GARD® Bearing Isolator/Labyrinth Seal, Flanged, Grease Purge, Standard, Glass Filled PTFE, 3.938 inch Shaft, 5.197 inch Bore, 0.819 inch Width, 0.320 inch Flange

29518-0638
Garlock KLOZURE® ISO-GARD® Bearing Isolator/Labyrinth Seal, Flanged, Grease Purge, Standard, Glass Filled PTFE, 3.938 inch Shaft, 5.197 inch Bore, 0.819 inch Width, 0.320 inch Flange
  • Shipping Weight: 0.33 lbs
  • Style/Model: ISO-GARD
  • Split or Solid: Solid
  • Shaft Size (inch): 3.938
  • Shaft Size (mm): 100.03
  • Bore Size (inch): 5.197
  • Bore Size (mm): 132.00
  • Width (inch): 0.819
  • Width (mm): 20.80
  • Material: Glass Filled PTFE
  • Stator Material: Glass Filled PTFE
  • Rotor Material: Glass Filled PTFE
  • Compliances/Standards: FDA Compliant, IEEE 841 Compliant, NEMA MG 1 Compliant
  • Configuration Type (Isolators): Flanged, Grease Purge
  • Axial Motion (inch): +/-0.015
  • Axial Motion (mm): +/-0.38
  • Brand: KLOZURE® ISO-GARD®
  • Compliances: FDA Compliant, IEEE 841 Compliant, NEMA MG 1 Compliant
  • Flange Exists: Yes
  • Flange Length (inch): 0.320
  • Flange Length (mm): 8.13
  • Max Temperature (C): 204
  • Max Temperature (F): 400
  • Min Temperature (C): -30
  • Min Temperature (F): -22
  • Misalignment Tolerance (inch): +/-0.020
  • Misalignment Tolerance (mm): +/-0.51
  • ORing Material: FDA Compliant FKM
  • Standard/Special: Standard
  • UPC Code: 717744656065
  • Primary Dimensional Unit of Measure: Imperial
  • Pressure Max (psi): Ambient
  • Pressure Max (bar): Ambient
  • Max Shaft Surface Speed (meter/sec): 22.9
  • Max Shaft Surface Speed (feet/min): 4,500

ISO-GARD® bearing isolators offer exceptional bearing protection for pumps, motors, and bearing supported industrial equipment under the harshest conditions.

ISO-GARD® products are constructed using a filled PTFE material which provides excellent chemical resistance.

  • Overview

Features and Benefits:

  • Easy by-hand installation — no need for an arbor press
  • Uses less energy than contact lip seals
  • Non-contact engineered labyrinth design reduces shaft drag
  • Non-wearing components
  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 55 ratings
  • Eliminates repairs for shaft grooving
  • Consistent sealing performance
  • Non-wearing components
  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 55 ratings
  • Non-wearing components means seal properties are not degraded over time

Typical Applications:

  • Pumps, Motors, Bearing supported industrial equipment