Garlock KLOZURE® SGi® Bearing Isolator/Labyrinth Seal, Flanged, Standard, Bronze, 2.554 inch Shaft, 3.937 inch Bore, 0.571 inch Width, 0.195 inch Flange

29802-6771
Garlock KLOZURE® SGi® Bearing Isolator/Labyrinth Seal, Flanged, Standard, Bronze, 2.554 inch Shaft, 3.937 inch Bore, 0.571 inch Width, 0.195 inch Flange
  • Shipping Weight: 1.435 lbs
  • Style/Model: SGI
  • Split or Solid: Solid
  • Shaft Size (inch): 2.554
  • Shaft Size (mm): 64.87
  • Bore Size (inch): 3.937
  • Bore Size (mm): 100.00
  • Width (inch): 0.571
  • Width (mm): 14.50
  • Stator Material: Bronze
  • Rotor Material: Bronze
  • Configuration Type (Isolators): Flanged
  • Material: Bronze
  • Compliances/Standards: IEEE 841 Compliant, IP66 Rating, NEMA MG 1 Compliant
  • Axial Motion (inch): +/-0.025
  • Axial Motion (mm): +/-0.64
  • Brand: KLOZURE® SGi™
  • Compliances: IP66 Rating, IEEE 841 Compliant, NEMA MG 1 Compliant
  • Flange Exists: Yes
  • Flange Length (inch): 0.195
  • Flange Length (mm): 4.95
  • Max Bore Size (inch): 3.938
  • Max Bore Size (mm): 100.03
  • Max Temperature (C): 204
  • Max Temperature (F): 400
  • Min Bore Size (inch): 3.936
  • Min Bore Size (mm): 99.97
  • Min Temperature (C): -30
  • Min Temperature (F): -22
  • Misalignment Tolerance (inch): +/-0.020
  • Misalignment Tolerance (mm): +/-0.51
  • ORing Material: FKM
  • Standard/Special: Standard
  • Unitizing Ring Material: Graphite Filled PTFE
  • UPC Code: 717744956240
  • Primary Dimensional Unit of Measure: Imperial
  • Pressure Max (psi): Ambient
  • Pressure Max (bar): Ambient
  • Min Shaft Size (inch): 2.552
  • Max Shaft Size (inch): 2.556
  • Max Shaft Surface Speed (meter/sec): 60.9
  • Min Shaft Size (mm): 64.82
  • Max Shaft Size (mm): 64.92
  • Max Shaft Surface Speed (feet/min): 12,000

The SGi® bearing isolators integrate the best features available for shaft grounding merged with superior bearing protection. SGi® bearing isolators are the best solution for your electric motors.

  • Overview

Features and Benefits:

  • Uses less energy than contact lip seals
  • Compliant with safety and industry manufacturing standards
  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 66 ratings
  • Non-wearing components means seal properties are not degraded over time
  • Eliminates repairs for shaft grooving
  • Consistent sealing performance
  • Non-wearing components
  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 66 ratings
  • Non-wearing components means seal properties are not degraded over time
  • Faster mean time to repair (MTTR) during rebuilds