Noticias y Eventos

Manténgase al día con Garlock navegando por nuestras noticias y eventos.

¿Busca seminarios web? Garlock ofrece seminarios web en vivo durante todo el año, haga click aquí para obtener más información.

Article: Streamlining Quality Assurance

March 1, 2024

What are the benefits of in-house validation testing in expansion joint manufacturing?

Find out the answer in this article written by Garlock's Lindsay Hornbeck, Nicholas Wheeler, and Ming-Hang Yang.

Click here to read the full article.

Article: Determining Low-Temperature Ratings for Rubber Seals

February 17, 2024

In this article, Product Engineer Sarah Young and Applications Engineer Brett Yoder explore creating safe product usage guidelines, focusing on how to determine low-temperature ratings for industrial rubber seals.

Click here to read the full article.

Article: Bridging the Gap with Case Studies and Real-World Results

February 12, 2024

In this insightful article, Garlock Engineer Jim Drago explores how to bridge the gap between theory and practice with case studies and real-world results.

Learn how Garlock gaskets offer a tolerance for poor conditions and variation of installation practices while maintaining a seal.

Click here to read the full article.

Article: The Capabilities of Expansion Joints

January 15, 2024

Why is validation testing a critical step for performance expansion joint design? Backed by validation testing, performance expansion joints are among the industry’s safest and most reliable.

In this article from Garlock engineers Derek Hicks and Lindsay Hornbeck, you'll read about three key areas where functional testing can make all the difference when validating a design for a specific end-use.

Click here to read the full article in Pumps & Systems Magazine.

Article: Performance Expansion Joints: More Than Meets the Eye

December 13, 2023

Material validation is critical when designing a high-performance expansion joint. Therefore, it is important to know what is on the inside of the expansion joint and not just the outside. Numerous issues could arise from improper material selection and layering construction that will ultimately affect the life and performance of the expansion joint. In this article, you'll learn about the benefits of investing in high-performance expansion joints.

Click here to read the full article.

Article: Addressing Sealing Challenges in Rotating Equipment for the Food and Pharmaceutical Industries

July 31, 2023

The most challenging operational environments for sealing mixers, agitators, and pumps are often found in the food and pharmaceutical industries. In this article, Garlock Senior Application Engineer Joshua Cavinee highlights some of the common environments within these industries, how the operating conditions affect seal design and selection, and shares some solutions to maintain a high level of performance in rotating equipment.

Click here to read the full article in Processing Magazine.

Article: Addressing Premature Failure in Elastomeric Gaskets

July 31, 2023

Water treatment challenges continue to worsen as municipalities grapple with the risk of encountering premature failure in elastomeric gaskets. Such a risk brings up several problems, including reduced efficiency, sudden equipment failure, contamination, and costly maintenance and downtime.

In this article, Garlock Fluid Sealing Specialist Nick Pucci discusses addressing premature failure in elastomeric gaskets.

Click here to read the full article in Treatment Plant Operator Magazine.

13 Common Questions Regarding Rotating Shaft Seals

March 7, 2023

Rotating shaft seals can be found in virtually every facet of daily lives—household appliances, cars, trucks and across industries. Though often treated as a commodity product, their failure can result in costly downtime and lost productivity. In this article, Senior Applications Engineer Karyn Stratton answers some frequently asked questions on Rotating Shaft Seals.

Click here to read the article in Pumps & Systems Magazine. 

Fluid Handling: Pushing the Limit With Graphite Seals

February 13, 2023

While new solutions are exciting, sometimes the best practice is to utilize existing technology in a novel way. In the case of valve-stem packing, mechanical limitations can negatively impact process efficiencies leading to premature failure. In this article by Applications Engineer Brennan Hughes, you'll learn how to prevent system failures with new approaches to valve-stem packing.

Click here to read the full article in Chemical Processing Magazine.

GPT is no longer an Enpro company.

Enpro Completes Divestiture of GPT

January 30, 2023

Enpro successfully completed the divestiture of GPT, formerly known as Garlock Pipeline Technologies, which was formed in 2012 when Enpro combined three businesses: PSI, Pikotek, and FrankenPlastik. In 2021 Enpro brought the PSI product lines to Garlock, where the Garlock team is proud to manufacture, support, and continue developing these products. GPT is the world's leading manufacturer of critical-service flange systems, spring-energized jacketed seals, and electrical flange isolation kits for various industries, including oil and gas, water, wastewater, construction, and infrastructure.

Click here to visit the GPT website.
An article about the low cost of high-grade PTFE diaphragms was written by by Alex Eanniello, applications engineer at Garlock.

The Low Cost of High-Grade PTFE Diaphragms

Dec 13, 2022

When selecting an appropriate diaphragm material to meet the needs of an application, a balance of functionality and cost-effectiveness must be met. Learn more about the correlation between performance and savings in this Fluid Handling International article written by Alex Eanniello, Applications Engineer at Garlock.

Click here for the full article in Fluid Handling International. 

Hafeez Hameer, Garlock Sealing Technologies, Receives the 2022 Robert K. Callahan Future Leader Award

Garlock Business Development Manager Hafeez Hameer Awarded 2022 Robert K. Callahan Future Leader Award

December 15, 2022

During the PTDA Industry Summit in October, Garlock's Hafeez Hameer was presented with the Robert K. Callahan Future Leaders Award. The award recognizes a young leader who exhibits a true passion for the industry and a desire to grow within the industry. 

Click here to see Hafeez accept his award.

Selecting Seals for the Uptick in Upstream Oil Production

Selecting Seals for the Uptick in Upstream Oil Production

SEPTEMBER 19, 2022

Upstream oil operations have improved their efficiency and capability of pulling greater quantities of oil out of the ground. Engineers achieve this by drilling deeper, using enhanced oil recovery (EOR), and running at higher temperatures. Although effective, these tactics can pose challenges to the seals used in pumps and compressors, as they often create demanding operating environments. 

In this article, Garlock Project Engineer,​ Sarah Young, and Garlock Applications Engineer, Brett Yoder, explain how seal selection can help you achieve efficiency, productivity, and safety in upstream oil production.

Click here to read the full article in Pumps & Systems Magazine

In this article written by Garlock Senior Applications Engineer Matt Tones, you’ll learn how gasket selection can affect performance in pulp and paper systems.

Small Components Make a Big Difference: The Sealing Systems of Pulp & Paper Mills

August 16, 2022

In the pulp and paper industry, larger, more expensive pieces of equipment tend to get the most attention. However, components such as gaskets and seals play a crucial role in the overall process.

In this article written by Garlock Senior Applications Engineer Matt Tones, you’ll learn how gasket selection can affect performance in pulp and paper systems.

Click here to read the full article in Pumps and Systems Magazine.

WavePro is Garlock's new made-to-order, low-loss dielectric material for antennas

Garlock Enters Wireless Communications Industry with WavePro®

August 8, 2022

Garlock has announced the launch of WavePro®, a new made-to-order, low-loss dielectric material for antennas. The news comes after an overwhelmingly positive response to the official release of WavePro® in June at the International Microwave Symposium in Denver, Colorado.

Click here to read the full Press Release.

An article about Expansion Joints was written by Garlock Product Designer, Jeff Blanks was recently featured in Pumps and Systems Magazine.

Extend Equipment Life with Bearing Isolator Labyrinth Seals

June 1, 2022

An article written by Garlock Product Designer, Jeff Blank, was recently featured in Pumps and Systems Magazine.

While the use of oil seals to retain lubrication in rotating machinery is common, bearing isolator labyrinth seal technology is often selected to protect bearings and lubrication. Manufacturers, repair facilities and users often select bearing isolators for use in harsh applications where conditions such as contamination, shaft misalignments and equipment vibrations are a concern to avoid frequent replacement.

Click here to read the full article in Pumps and Systems Magazine.

An article about Expansion Joints was written by Garlock Product Engineer, Brandon Phillips and recently featured in Pumps and Systems Magazine.

Your Guide to Expansion Joints in Pulp and Paper

May 1, 2022

An article written by Garlock Product Engineer, Brandon Phillips, was recently featured in Pumps and Systems Magazine.

The pulp and paper industry provides products—such as paper stationery, cups, tissues and paper-based packaging, including cardboard—that are integral to modern life. The process of manufacturing paper products is complex and choosing the right expansion joint is important for optimizing performance.

Click here to read the full article in Pumps and Systems Magazine.

Barb Ross accepts the Wendy B. McDonald award, November 2021

Garlock Sales Director Barbara Ross Awarded the 2021 Wendy B. McDonald Award

November 15, 2021

During the PTDA Industry Summit in October, Barbara Ross, Director of Sales – Rotary Seals, was presented with the Wendy B. McDonald Award. The award recognizes a woman who is a critical contributor to her company’s success and has affected positive change on the power transmission/motion control industry.

Click here to see Barb Ross accept her award.

Announcing Garlock's New Website

Announcing the All-New Garlock.com

November 5, 2021

Our team has been hard at work creating a new website experience designed around the features customers told us they wanted most:

  • New Digital Product Catalog
  • Search and Sort: Find SKU Level Parts Faster
  • Technical Documents on Every Product

Click here to try it out and browse all-new product categories.

Garlock's fall webinar series is going on now.

Serie de seminarios web de Garlock Fluid Sealing Academy: Selección e instalación

30 DE SEPTIEMBRE DE 2021

Únase a nosotros los martes de este otoño de 12:00 p. m. a 1:00 p. m. EST para conocer las soluciones de sellado del personal experto de Garlock. Del 21 de septiembre al 30 de noviembre, esta serie de 10 sesiones cubre una introducción básica, selección de productos, instalación y mejores prácticas para cada línea de productos de Garlock. Estas capacitaciones de 45 minutos son la manera perfecta de ampliar su conocimiento del producto e incluyen una sesión de preguntas y respuestas de 15 minutos donde los asistentes pueden hacer preguntas específicas de la aplicación.

¡Haga Click aquí para explorar los temas de los seminarios web e inscríbase hoy!

The American Society of Mechanical Engineers promotes the art, science & practice of multidisciplinary engineering around the globe.

Bridas y juntas ASME vs AWWA - Boletín técnico

15 DE ENERO DE 2021

A menudo, las juntas para bridas AWWA se piden como juntas de cara completa o de anillo n.° 150 o n.° 300. Desafortunadamente, esto puede llevar a que los clientes reciban juntas del tamaño incorrecto. No solo las dimensiones de la brida son diferentes en algunas situaciones, sino que las dimensiones de las juntas también pueden diferir.

Haga Click aquí para descargar el PDF de este boletín técnico.

Garlock is proud to be an Enpro company.

EnPro presenta una nueva marca global en reconocimiento a la transformación de la cartera de negocios

29 DE MARZO DE 2021

EnPro Industries, Inc. (NYSE: NPO), una empresa líder en tecnología industrial que aprovecha la ciencia de los materiales en su cartera de negocios, anunció hoy que, en reconocimiento a la transformación de su cartera de negocios, está lanzando un cambio de marca global a "Enpro" y adoptando un nuevo logotipo corporativo.

Haga Click aquí para leer el anuncio completo en el sitio web de Enpro.

Garlock shares an update regarding Covid 19.

Respuesta de Garlock al COVID-19 (Coronavirus) - EE. UU. y Canadá

30 DE MARZO DE 2020

Operamos como proveedor de productos esenciales para industrias esenciales, lo que nos exime de las reducciones de personal en persona que se exigen en todo el estado de Nueva York. Seguimos abiertos y operando para continuar brindando los bienes y servicios que se necesitan tan desesperadamente durante estos tiempos inciertos.

Continuaremos monitoreando la situación y notificaremos a nuestros clientes lo antes posible sobre cualquier cambio adicional que nos afecte a nosotros o a usted durante este tiempo.

¿Preguntas?. Haga Click aquí para ponerse en contacto.

Garlock was featured on WROC 8.

En las noticias: Garlock prospera durante más de un siglo en el condado de Wayne

20 DE ENERO DE 2020

La historia de más de 132 años de Garlock fue el tema de una presentación en WROC 8 el 18/9/2019 y se presentó nuevamente recientemente como parte de la serie Greater Rochester Enterprise Why ROC. El entrevistado Pu DeMarco, Gerente de Informes y Análisis Financieros, junto con David Campos, Director de Ventas, hablaron sobre la longevidad y los valores comerciales de Garlock durante su conversación.

Haga Click aquí para leer el artículo completo.

Garlock presents FLOOD-GARD bearing isolators.

Presentamos el aislador de rodamientos FLOOD-GARD™

17 DE JUNIO DE 2019

Garlock se enorgullece de lanzar los aisladores de rodamientos FLOOD-GUARD™, que ofrecen el rendimiento comprobado de los aisladores de rodamientos de Garlock mientras se fabrican específicamente para aplicaciones inundadas. El diseño del sello con patente en trámite brinda protección a los rodamientos incluso en los entornos inundados más desafiantes, lo que prolonga la vida útil de los equipos rotativos, como cajas de engranajes, bombas y motores.

Haga Click aquí para leer el comunicado de prensa completo.

Garlock is proud to be an Enpro company.

EnPro Industries anuncia la adquisición de The Aseptic Group

2 DE JULIO DE 2019

EnPro Industries, Inc. (NYSE: NPO) anunció hoy que adquirió The Aseptic Group (que comprende Aseptic Process Equipment SAS y Aseptic Services SARL), una empresa privada que distribuye, diseña y fabrica productos de transferencia de fluidos asépticos para la industria farmacéutica y biofarmacéutica. industrias El Grupo Aseptic pasará a formar parte de la familia de empresas Garlock de EnPro, un proveedor global líder de productos de sellado y manejo de fluidos de alto rendimiento para las industrias de procesos.

Haga Click aquí para leer el comunicado de prensa completo.

Garlock offers industry-leading oil and gas sealing solutions.

Artículo: Perfiles de superficie mejorados para juntas de Matt Tones

15 DE ABRIL DE 2019

Matt Tones, ingeniero de aplicaciones sénior de Garlock, explica la importancia del perfilado de superficies en este artículo de la revista Pumps and Systems publicado este mes.

Haga Click aquí para leer el artículo completo en el sitio web.

Article by Chris Boss explains How to Inviestigate Compression Packing Failure Modes

Artículo: Cómo investigar los modos de falla del empaque de compresión por Chris Boss

03 DE ENERO DE 2019

El ingeniero de aplicaciones sénior de Garlock, Chris Boss, explica los mejores métodos para investigar fallas en empaques de compresión y sus causas en esta edición de octubre de 2018 de la revista Pumps and Systems.

CHaga Click aquí para leer el artículo completo en el sitio web.

A photo of the grand opening ceremony celebrating Garlock Suzhou's opening.

Gran inauguración de la planta de Garlock en Suzhou

04 DE DICIEMBRE DE 2018

Garlock se complace en anunciar la gran inauguración de Garlock & Technetics Group en Suzhou, China. Más de 100 invitados de más de 70 empresas asistieron a la ceremonia la semana pasada como parte de la celebración.

“Hemos desarrollado relaciones con clientes chinos clave en los campos de energía, acero, productos químicos y pulpa y papel”, dijo el Sr. Michael Faulkner, presidente de Garlock Sealing Technologies. “Estamos trabajando para asociarnos con esos clientes para desarrollar productos innovadores diseñados para cumplir con los requisitos únicos del mercado chino. Y a través de esa asociación e innovación, estamos creando conciencia tanto de la marca Garlock como de nuestro noble objetivo de proteger a las personas y el medio ambiente”.

Garlock has many high-temperature ultra durable sealing soutions perfect for the primary metal industry.

Presentamos ABRA-SHIELD™

25 DE SEPTIEMBRE DE 2018

Presentamos ABRA-SHIELD™, un material para juntas de expansión diseñado para la protección contra la abrasión Garlock se enorgullece de lanzar ABRA-SHIELD®, un material de revestimiento para juntas de expansión patentado diseñado para brindar resistencia a la abrasión y sustentabilidad en condiciones operativas exigentes de alta temperatura.

Como la incorporación más reciente a la familia de Garlock de materiales para juntas de expansión resistentes a la abrasión, ABRA-SHIELD® se unirá a ABRA-LINE® y al caucho natural para brindar una variedad de revestimientos que se adaptan a una mayor protección contra la abrasión. ABRA-SHIELD™ será una opción para usar con varios productos de juntas de expansión que ofrece Garlock, incluidos los estilos 204, 206, 7250, 8400 y 9394. Estas juntas de construcción única también brindan altos niveles de protección contra el estrés, la desalineación, la vibración, Ruido, golpes y corrosión.